Table of Contents
Advertisement
2 Installation and commissioning
2.5.9. Installation of cooling fan for motors, axes 1 and 2 (option)
Continued
Cooling fan
The details of the cooling fan are shown in the figure below.
xx0500002158
A
B
C
D
Required equipment
Equipment
Cooling fan
Cabling, cooling fans, axes
1 or 2.
Plate for customer
connections
Additional cabling to and
inside the controller
Material set fan axes 1 and
2
Cable harness inside
controller
Locking liquid
86
Fanbox
Attachment screws, fanbox plates (9 pcs)
Groove in the connector
Tightening screws, fanbox (3 pcs)
Art. no.
3HAC15374-1
3HAC023599-001
3HAC025778-001
-
3HAC023999-001
3HAC025488-001
-
Note
Choose this cabling if equipping the
robot with cooling fans on axis 1 or 2 .
An additional connection plate must be
fitted to the robot base, if not already
installed. The plate is shown in the figure
Plate for customer connections, at base
on page
87.
Loctite 243. Used for the three tightening
screws.
Continues on next page
3HAC026876-001 Revision: C
Advertisement
Table of Contents
