Epson S1D13706 Technical Manual page 203

Epson Research and Development
Vancouver Design Center
Note
Note
Programming Notes and Examples
Issue Date: 01/02/23
In SwivelView 0°, these registers set the vertical coordinates (y) of the sub-windows's top
left corner. Increasing values of y move the top left corner downwards in steps of 1 line.
Program the Sub-Window Y Start Position registers so that
sub-window Y start position registers = y
In SwivelView 90°, these registers set the horizontal coordinates (x) of the sub-window's
top right corner. Increasing values of x move the top right corner towards the right in steps
of 32 ÷ bits-per-pixel (see Table 8-2: )
Program the Sub-Window Y Start Position registers so that
sub-window Y start position registers = (panel height - x) ÷ (32 ÷ bits-per-pixel)
panel height - x must be a multiple of 32 ÷ bits-per-pixel.
In SwivelView 180°, these registers set the vertical coordinates (y) of the sub-window's
bottom right corner. Increasing values of y move the bottom right corner downwards in
steps of 1 line.
Program the Sub-Window Y Start Position registers so that
sub-window Y start position registers = panel height - y
In SwivelView 270°, these registers set the horizontal coordinates (x) of the sub-window's
bottom left corner. Increasing values of x move the bottom left corner towards the right in
steps of 32 ÷ bits-per-pixel (see Table 8-2: ).
Program the Sub-Window Y Start Position registers so that
sub-window Y start position registers = x ÷ (32 ÷ bits-per-pixel)
x must be a multiple of 32 ÷ bits-per-pixel.
Page 43
S1D13706
X31B-G-003-03