Figure 11-1: 1 Bit-Per-Pixel Monochrome Mode Data Output Path; Figure 11-2: 2 Bit-Per-Pixel Monochrome Mode Data Output Path; Look-Up Table Architecture; Monochrome Modes - Epson S1D13706 Technical Manual

Page 132

11 Look-Up Table Architecture

11.1 Monochrome Modes

1 Bit-per-pixel Monochrome Mode
Green Look-Up Table 256x6
00
01
FC
FD
FE
FF
1 bit-per-pixel data
from Display Buffer
2 Bit-per-pixel Monochrome Mode
Green Look-Up Table 256x6
00
01
02
03
FC
FD
FE
FF
2 bit-per-pixel data
from Display Buffer
S1D13706
X31B-A-001-08
The following figures are intended to show the display data output path only.
Note
When Video Data Invert is enabled the video data is inverted after the Look-Up Table.
The green Look-Up Table (LUT) is used for all monochrome modes.

Figure 11-1: 1 Bit-per-pixel Monochrome Mode Data Output Path

Figure 11-2: 2 Bit-per-pixel Monochrome Mode Data Output Path

6-bit Gray Data
00
01
00
6-bit Gray Data
01
10
11
Epson Research and Development
Vancouver Design Center
= unused Look-Up Table entries
= unused Look-Up Table entries
Hardware Functional Specification
Issue Date: 01/11/13