Epson S1D13706 Technical Manual page 308

Page 4
Usage
S1D13706
X31B-B-004-02
At the prompt, type:
13706bmp bmpfile1 [bmpfile2] [ds=n | ds=?] [move=n] [/noinit] [/r90 | /r180 | /r270]
[/v] [/?]
Where:
bmpfile1
bmpfile2
ds=n
ds=?
move=n
/noinit
/r90
/r180
/r270
/v
/?
Note
13706BMP displays the bmpfile image(s) and returns to the prompt.
Specifies filename of the windows format bmp image used
for the main window (display surface 0).
Specifies filename of the windows format bmp image used
for the sub-window (display surface 1). If bmpfile2 is
not specified, bmpfile1 is also used for the sub-window.
Selects display surfaces (see Section , "Display Surfaces"
on page 5).
Shows available display surfaces (see Section , "Display
Surfaces" on page 5).
Automatically moves the sub-window for n seconds. To
move the sub-window indefinitely set n=-1.
Skips full register initialization. Only registers used for
changing the color depth (bpp) are updated.
Additionally, some registers are read to determine infor-
mation such as display size.
Enables SwivelView 90° mode, counter-clockwise
hardware rotation of the LCD image by 90 degrees.
Enables SwivelView 180° mode, counter-clockwise
hardware rotation of the LCD image by 180 degrees.
Enables SwivelView 270° mode, counter-clockwise
hardware rotation of the LCD image by 270 degrees.
Verbose mode (provides information about the displayed
image).
Displays the help message.
Epson Research and Development
Vancouver Design Center
13706BMP Demonstration Program
Issue Date: 01/02/23