S1D13706 Host Bus Interface; Host Bus Interface Pin Mapping - Epson S1D13706 Technical Manual

Embedded memory lcd controller

Hide thumbs Also See for S1D13706:

Table of Contents

3 S1D13706 Host Bus Interface

X31B-G-014-02

The S1D13706 implements a 16-bit native REDCAP2 host bus interface which is used to

interface to the REDCAP2 processor.

The REDCAP2 host bus interface is selected by the S1D13706 on the rising edge of

RESET#. After releasing reset, the bus interface signals assume their selected configu-

ration. For details on S1D13706 configuration, see Section 4.3, "S1D13706 Hardware

Configuration" on page 15.

The following table shows the functions of each Host Bus Interface signal.

Table 3-1: Host Bus Interface Pin Mapping

S1D13706 Pin Names

REDCAP2 Internal Chip

Connected to HIO V

Interfacing to the Motorola RedCap2 DSP With Integrated MCU

Epson Research and Development

Vancouver Design Center

Issue Date: 01/02/23

Table of Contents