Figure 13-1: Picture-In-Picture Plus With Swivelview Disabled - Epson S1D13706 Technical Manual

Epson Research and Development
Vancouver Design Center
13 Picture-in-Picture Plus (PIP
13.1 Concept
TM
0° SwivelView
panel's origin
+
PIP window x start position
(REG[85h],REG[84h])
Hardware Functional Specification
Issue Date: 01/11/13
Picture-in-Picture Plus enables a secondary window (or PIP
display window. The PIP
and is controlled through the PIP
+
REG[91h]). The PIP window retains the same color depth and SwivelView orientation as
the main window.
The following diagram shows an example of a PIP
registers used to position it.
main-window
+
PIP window

Figure 13-1: Picture-in-Picture Plus with SwivelView disabled

+
)
+
window may be positioned anywhere within the virtual display
+
window control registers (REG[7Ch] through
+
PIP window y start position
(REG[89h],REG[88h])
+
PIP window y end position
(REG[91h],REG[90h])
+
PIP window x end position
(REG[8Dh],REG[8Ch])
+
window) within the main
+
window within a main window and the
Page 143
S1D13706
X31B-A-001-08