Epson S1D13706 Technical Manual page 368

Page 16
Comments
S1D13706
X31B-E-006-01
• The display driver is CPU independent, allowing use of the driver for several Windows
CE Platform Builder supported platforms.
• By default, the 13706CFG program assumes PCI addressing for the S5U13706B00C
evaluation board. This means that the display driver will automatically locate the
S1D13706 by scanning the PCI bus (currently only supported for the CEPC platform). If
you select the address option "Other" and fill in your own custom addresses for the
registers and video memory, then the display driver will not scan the PCI bus and will
use the specific addresses you have chosen.
• If you are running 13706CFG.EXE to produce multiple MODE tables, make sure you
change the Mode Number in the WinCE tab for each mode table you generate. The
display driver supports multiple mode tables, but only if each mode table has a unique
mode number.
• At this time, the drivers have been tested on the x86 CPUs and have been built with Plat-
form Builder v3.00.
Epson Research and Development
Vancouver Design Center
Windows® CE 3.x Display Drivers
Issue Date: 01/05/25