Look-Up Table Registers - Epson S1D13706 Technical Manual

Epson Research and Development
Vancouver Design Center

8.3.3 Look-Up Table Registers

Note
Look-Up Table Blue Write Data Register
REG[08h]
7 6
bits 7-2
Note
Look-Up Table Green Write Data Register
REG[09h]
7 6
bits 7-2
Note
Look-Up Table Red Write Data Register
REG[0Ah]
7 6
bits 7-2
Note
Hardware Functional Specification
Issue Date: 01/11/13
The S1D13706 has three 256-position, 6-bit wide LUTs, one for each of red, green, and
blue (see Section 11, "Look-Up Table Architecture" on page 132).
LUT Blue Write Data Bits 5-0
5
LUT Blue Write Data Bits [5:0]
This register contains the data to be written to the blue component of the Look-Up Table.
The data is stored in this register until a write to the LUT Write Address register
(REG[0Bh]) moves the data into the Look-Up Table.
The LUT entry is updated only when the LUT Write Address Register (REG[0Bh]) is
written to.
LUT Green Write Data Bits 5-0
5
LUT Green Write Data Bits [5:0]
This register contains the data to be written to the green component of the Look-Up Table.
The data is stored in this register until a write to the LUT Write Address register
(REG[0Bh]) moves the data into the Look-Up Table.
The LUT entry is updated only when the LUT Write Address Register (REG[0Bh]) is
written to.
LUT Red Write Data Bits 5-0
5
LUT Red Write Data Bits [5:0]
This register contains the data to be written to the red component of the Look-Up Table.
The data is stored in this register until a write to the LUT Write Address register
(REG[0Bh]) moves the data into the Look-Up Table.
The LUT entry is updated only when the LUT Write Address Register (REG[0Bh]) is
written to.
4 3
4 3
4 3
Write Only
n/a
2 1
Write Only
n/a
2 1
Write Only
n/a
2 1
X31B-A-001-08
Page 99
0
0
0
S1D13706