Epson S1C17624 Technical Manual page 163

Cmos 16-bit single chip microcontroller
Table of Contents

Advertisement

13 16-BiT PWM TiMeRS (T16a2)
CAPBOWIF is a T16A2 interrupt flag that is set to 1 when the capture B register is overwritten.
CAPBOWIF is reset by writing 1.
D4
CaPaOWiF: Capture a Overwrite interrupt Flag Bit
Indicates whether the cause of capture A overwrite interrupt has occurred or not.
1 (R):
Cause of interrupt has occurred
0 (R):
No cause of interrupt has occurred (default)
1 (W):
Flag is reset
0 (W):
Ignored
CAPAOWIF is a T16A2 interrupt flag that is set to 1 when the capture A register is overwritten.
CAPAOWIF is reset by writing 1.
D3
CaPBiF: Capture B interrupt Flag Bit
Indicates whether the cause of capture B interrupt has occurred or not.
1 (R):
Cause of interrupt has occurred
0 (R):
No cause of interrupt has occurred (default)
1 (W):
Flag is reset
0 (W):
Ignored
CAPBIF is a T16A2 interrupt flag that is set to 1 when the counter value is captured in the capture B
register.
CAPBIF is reset by writing 1.
D2
CaPaiF: Capture a interrupt Flag Bit
Indicates whether the cause of capture A interrupt has occurred or not.
1 (R):
Cause of interrupt has occurred
0 (R):
No cause of interrupt has occurred (default)
1 (W):
Flag is reset
0 (W):
Ignored
CAPAIF is a T16A2 interrupt flag that is set to 1 when the counter value is captured in the capture A
register.
CAPAIF is reset by writing 1.
D1
CBiF: Compare B interrupt Flag Bit
Indicates whether the cause of compare B interrupt has occurred or not.
1 (R):
Cause of interrupt has occurred
0 (R):
No cause of interrupt has occurred (default)
1 (W):
Flag is reset
0 (W):
Ignored
CBIF is a T16A2 interrupt flag that is set to 1 when the counter reaches the value set in the compare B
register.
CBIF is reset by writing 1.
D0
CaiF: Compare a interrupt Flag Bit
Indicates whether the cause of compare A interrupt has occurred or not.
1 (R):
Cause of interrupt has occurred
0 (R):
No cause of interrupt has occurred (default)
1 (W):
Flag is reset
0 (W):
Ignored
CAIF is a T16A2 interrupt flag that is set to 1 when the counter reaches the value set in the compare A
register.
CAIF is reset by writing 1.
13-20
Seiko epson Corporation
S1C17624/604/622/602/621 TeChniCal Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

S1c17604S1c17622S1c17602S1c17621

Table of Contents