Procedure - On The Control Cabinet Door - ABB IRC5 Product Manual

Procedure - On the control cabinet door

The following procedure details how to mount the FlexPendant holder on the control cabinet
door.
3HAC021313-001 Revision: K
Action
1. At assembly of FlexPendant holder on the
mounting plate start with fasten the
Fastite screws (2 pcs) to the mounting
plate.
2. Bend the two flanges on the mounting
plate to match the upper shape of the
door.
3. Mount the FlexPendant holder and cable
bracket to the mounting plate with the
enclosed Fastite screws (6 pcs).
4. Remove the protective liner from the tape
on the mounting plate.
2 Installation and Commissioning, IRC5
2.4.4. Mounting the FlexPendant holder
Note/Illustration
A
xx0800000048
• A: Fastite screw (2 pcs)
xx0700000242
• A: Flange
xx0700000244
• A: Cable bracket
• B: FlexPendant holder
Continued
A
B
Continues on next page
45