To Refit The Panel Board Unit - ABB IRC5 Product Manual

4 Repair activities, controller IRC5
4.2. Replacement of panel board
Continued
Refitting
The procedure below details how to refit the panel board unit.
186
Action
1.
DANGER!
Before any work inside the cabinet, please observe
the safety information in section
sure that the main power has been switched off! on
page 28.
2.
esd
WARNING!
The unit is sensitive to ESD, before handling the unit
please observe the safety information in section
WARNING - The unit is sensitive to ESD! on page 29
3. Refit the panel board unit.
4. Refit the lower attachment screw.
5. Reconnect all connectors.
Note/Illustration
DANGER - Make
xx0400000812
•
•
3HAC021313-001 Revision: K
A: fixed attachments
B: hole for attachment
screw