Cleaning Moist Dust Filter - ABB IRC5 Product Manual

3.4.2. Cleaning moist dust filter

Location
The moist dust filters are located as shown in the illustration below.
xx0700000128
A
B
C
D
Required equipment
Equipment
Cleaning agent
Compressed air
Cleaning
The procedure below details how to clean the moist dust filter.
3HAC021313-001 Revision: K
Moist dust filter magazine
Single Cabinet Controller
Dual Cabinet Controller, Control Module
Dual Cabinet Controller, Drive Module
Action
1. Remove the moist dust filter.
2. Clean the filter three or four times.
3. Allow the filter to dry in one of these ways:
• Lying flat on a flat surface
• Blow with compressed air in opposite
direction of filter airflow.
3 Maintenance activities, controller IRC5
3.4.2. Cleaning moist dust filter
Note
Water 30-40°C with cleansing liquid or detergent.
Note/Illustration
How to remove the moist dust
filter is detailed in section
Replacement of moist dust filter
on page
Do not wring the filter out!
173.
Continues on next page
177