Lighting The Backlight (Backlight) (Nx-200/ Nx-210/ Nx-300/ Nx-410/ Nx-411 Only) - Kenwood NEXEDGE NX-200 Function Reference

5 INDICATION AND DISPLAY

5.4 Lighting the Backlight (Backlight) (NX-200/ NX-210/ NX-300/ NX-410/ NX-411 Only)

5.4 Lighting the Backlight (Backlight)
(NX-200/ NX-210/ NX-300/ NX-410/ NX-411 Only)
The backlight is equipped on the back side of the LCD on the transceiver. By lighting the backlight, the LCD can be viewed
in dark places or at night.
Pressing the Backlight key toggles the backlight between On and Off. Also, the backlight will light when Auto Backlight is
configured to be enabled.
After the backlight is turned On, the backlight will automatically be turned Off upon the elapse of the time configured for
Backlight Timer. If any key other than the PTT switch is pressed before the time configured for Backlight Timer elapses, the
lighting time of the backlight will be extended by the time configured for Backlight Timer.
Note
The Backlight key and Auto Backlight cannot be used at the same time.
Configuration using KPG-111D/ DN
• Assigning functions to the PF keys on the transceiver (
• Configuring the Auto Backlight to be enabled or disabled (
FUNC (K)/Ver 4.00
FPRG 8.12 Key Assignment Window)
See
See FPRG 8.10.1 Common Page 1 Tab)
CONTENTS INDEX 74