Receiving A Short Message - Kenwood NEXEDGE NX-200 Function Reference

12 FleetSync
12.7 Sending and Receiving a Short Message (Short Data Call)

Receiving a Short Message

Upon receiving a Short Message, the received Short Message appears on the main display, and the transceiver can send
the Short Message to an external device from the communication ports.
Item
The received Short Message appears on the transceiver main display.
If "Fixed" is configured for Message Display Type, only Short Message appears.
Display
The received Short Message appears on the main display for 3 sec and ID Name appears for 2 sec alternately if
"Alternate" is configured for Message Display Type.
Alert Tone Alert Tone sounds upon receipt of a Short Message.
The transceiver sends the received Short Message using a serial command. This message is sent to an external
PC Command
device that is connected to the transceiver, such as a PC.
Note
A maximum of 15 received Short Message along with Short Messages can be stored in the stack memory of the transceiver. (Refer to
3.7 Viewing the Receive History (Stack) on page
Transceiver Behavior
1
The transceiver starts receiving a Short Message.
"RECEIVE DATA" appears on the transceiver main display.
2
The transceiver receives a Short Message.
"COMPLETE" appears on the main display.
FUNC (K)/Ver 4.00
Table 12-18 Receiving a Short Message
Description
38.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 339