Kenwood NEXEDGE NX-200 Function Reference page 429

16 COMMUNICATIONS IN AN EMERGENCY
16.2 Zone-CH/GID Used for Emergency Mode
If the transceiver receives no acknowledgment until the time configured for Maximum ACK Wait Time elapses after sending
the Emergency Alarm Request message, the transceiver resends the Emergency Alarm Request message. If the transceiver
still cannot receive an acknowledgment after sending the message 5 times, the transceiver enters Emergency Mode.
Note
• To use this function, Emergency Alarm needs to be enabled, and "FleetSync/MDC-1200" needs to be configured for Emergency ID.
• The transceiver receiving an Emergency Alarm Request message notifies a user of the receipt of the Emergency Call according to the
configuration for Emergency Response.
• If a zone, channel or GID is changed while the transceiver is in Emergency Mode, the transceiver resends the Emergency Alarm
Request message on the channel or GID which the transceiver has migrated to.
• The transceiver can send an Emergency Alarm Request message; but the transceiver cannot send an acknowledgment even if the
Emergency Alarm Request message has been received.
Configuration using KPG-111D/ DN
• Configuring the Emergency Alarm (
• Configuring the Maximum ACK Wait Time (
16.2 Zone-CH/GID Used for Emergency Mode
The channel or GID to be used when the transceiver enters Emergency Mode can be configured.
Emergency CH/GID Type
Emergency CH/GID Type is the type of a channel or GID used when the transceiver is placed in Emergency Mode.
Emergency CH/GID Type can be configured using KPG-111D/ DN.
Configuration
When the transceiver enters Emergency Mode, the transceiver resets the migration state of channels, such as
Selected Home CH/GID, and then the transceiver executes the Emergency behavior on the previously selected channel or
GID.
When the transceiver enters Emergency Mode, the transceiver migrates to the Zone-CH/GID configured for
Fixed
Emergency Zone-CH/GID, and then the transceiver executes the Emergency behavior.
The transceiver behaves as below according to the configuration for Emergency CH/GID Type.
FUNC (K)/Ver 4.00
See FPRG 8.28.1 Emergency 1 Tab)
See FPRG 8.18.3 Parameter Tab)
Table 16-1 Emergency CH/GID Type
Description
CONTENTS INDEX 395