Kenwood NEXEDGE NX-200 Function Reference page 288

10 ANALOG CONVENTIONAL SYSTEM
10.1 Initiating Voice Communications (Basic Transmission and Reception)
Operating the Transceiver
1
Press the Squelch Level
The current Squelch Level appears on the main display.
2
Press the Up or Down
to change Squelch Level.
Pressing the Up key (NX-200/ NX-210/ NX-300/ NX-410/
NX-411), or pressing the [ ] key (Mobile) increases Squelch
Level.
Pressing the Down key (NX-200/ NX-210/ NX-300/ NX-410/
NX-411), or pressing the [ ] key (Mobile) decreases Squelch
Level.
3
Press the Side 1 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411) or the
Squelch Level changes and then the display will restore to normal
display.
Note
• Squelch Level can be configured for a channel in an Analog Conventional system. Also, Squelch Level can be configured even for a
channel where "Mixed" is configured for Channel Type. Squelch Level 5 is configured for other channels.
• Signaling is disabled while the Squelch Level is being changed.
• Refer to Key Operations for Each Mode on page 531
Configuration using KPG-111D/ DN
Configuring the Squelch Level (
FUNC (K)/Ver 4.00
key.
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or press the
for key operations for changing the Squelch Level.
See FPRG 8.11.1 Conventional Tab)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
[ ] or [ ]
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Triangle key (Mobile).
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX
key (Mobile)
254