Kenwood NEXEDGE NX-200 Function Reference page 45

2 GETTING STARTED
2.1 Connecting the Transceiver to a PC
 Using the KPG-36U
Mobile
The transceiver and a PC need to be connected by using the KPG-46A or KPG-46U programming cable.
Refer to the figure below.
 Using the KPG-46A
Note
If no RS-232C communication port is available on a PC, convert by using KCT-53U the USB port on the PC to DB 9-pin, and then
connect the KPG-46A.
FUNC (K)/Ver 4.00
KPG-36U
To the
Universal Connector
To a USB Port
To the Microphone Connector
KPG-46A
To RS-232C Port
(D-sub 9-pin male)
CONTENTS INDEX 11