3 BASIC OPERATIONS
3.9 Locking the Transceiver Keys (Key Lock) (Portable Only)
3.9
Locking the Transceiver Keys (Key Lock) (Portable Only)
Key Lock is used to disable the transceiver key operation.
This function can be used to avoid erroneous operation of the transceiver by physically contacting the transceiver while a
user is carrying it around the waist, etc.
Pressing the Key Lock key toggles Key Lock between activated and deactivated.
Even if a key is pressed while Key Lock is activated, the Key-entry Error Tone sounds from the transceiver, but the action
has no effect. However, keys assigned with the following functions, the PTT switch, and Selector (with a stopper) can be
used even if Key Lock is activated.
•
Emergency
•
Backlight
•
Monitor
•
Monitor Momentary
•
Squelch Off
•
Squelch Off Momentary
•
Function
•
Key Lock
Note
For NX-200S/ NX-300S, the transceiver has no indicator and display, but this function is available.
Operating the Transceiver
Activating the Key Lock
1
Press and hold the
needs to be pressed.
"LOCKED" appears on the main display, and then Key Lock will
be activated.
Deactivating the Key Lock
1
Press and hold the
needs to be pressed.
Key Lock will be deactivated.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
FUNC (K)/Ver 4.00
Key Lock
key while Key Lock is deactivated. For NX-200S/ NX-300S, the
Key Lock
key while Key Lock is activated. For NX-200S/ NX-300S, the
See
FPRG 8.12 Key Assignment Window)
Key Lock
Key Lock
CONTENTS
INDEX
key
key
63