Changing The Tone Volume Level With A Single Touch (Selectable Tone Level); Temporarily Reducing The Volume Level Of The Speaker Microphone (Speaker Attenuation) (Portable Only) - Kenwood NEXEDGE NX-200 Function Reference

6 SOUND
6.4 Functions Related to the Volume Configuration

Changing the Tone Volume Level with a Single Touch (Selectable Tone Level)

Selectable Tone Level can be used to change the Tone Volume by using a PF key.
Pressing the Fixed Volume key causes the volume level of tones to be changed to Low Volume Level (Fixed Volume) or
High Volume Level (Fixed Volume) configured using KPG-111D/ DN.
Also, pressing the Menu key allows the transceiver to enter Menu Mode, and then Tone Volume can be changed by
selecting the "Fixed Volume". (Refer to
Operating the Transceiver
1
Press the Fixed Volume
The tone volume switches in the following order: Low Volume Level (Fixed Volume)  High Volume Level (Fixed Volume) 
Off  Low Volume Level (Fixed Volume)....
Configuration using KPG-111D/ DN
• Configuring the Low Volume Level (Fixed Volume) and High Volume Level (Fixed Volume) (
Common Page 2 Tab)
• Assigning functions to the PF keys on the transceiver (
Temporarily Reducing the Volume Level of the Speaker Microphone
(Speaker Attenuation) (Portable Only)
Speaker Attenuation can be used to temporarily reduce the volume level of the speaker microphone.
This function can be used while the transceiver is in use in a quiet place. This function is normally activated and the
transceiver can pause Speaker Attenuation only if making an important call, such as an emergency call.
Pressing the Speaker Attenuation key toggles Speaker Attenuation between activated and deactivated.
Operating the Transceiver
 Activating Speaker Attenuation
1
Press the Speaker Attenuation
Speaker Attenuation is activated and then the volume level will be decreased by approximately 10 dB.
 Deactivating Speaker Attenuation
1
Press the Speaker Attenuation
Speaker Attenuation is deactivated and then the volume level will restore to the previous level.
Note
• "Speaker Attenuation" can only be assigned to a PF key on the speaker microphone.
• Speaker Attenuation is deactivated if the speaker microphone is removed while Speaker Attenuation is activated.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the Speaker Microphone (
FUNC (K)/Ver 4.00
3.4 Using Menu Mode on page
key.
key while the Speaker Attenuation is deactivated.
key while the Speaker Attenuation is activated.
23.)
See FPRG 8.12 Key Assignment Window)
FPRG 8.12.5 Mic Key Tab)
See
CONTENTS
FPRG 8.10.2
See
INDEX 95