Temporarily Disabling The Squelch (Squelch Off) - Kenwood NEXEDGE NX-200 Function Reference

8 NXDN CONVENTIONAL SYSTEM
8.1 Initiating Voice Communications (Basic Transmission and Reception)

Temporarily Disabling the Squelch (Squelch Off)

Squelch Off is the function to disable the RAN code and Optional Signaling configured for the channel on which the
transceiver waits for and unmutes the speaker upon detection of an NXDN frame.
With this function, the transceiver can unmute the speaker without receiving a carrier. A user can use this function to
monitor the availability of channels prior to transmitting in order to prevent from interfering with other parties.
To use this function, the Squelch Off or Squelch Off Momentary key must be assigned.
Or, pressing the Menu key causes the transceiver to enter Menu Mode, and then "Squelch Off" can be toggled between
enabled and disabled by selecting Squelch Off. (Refer to
Operating the Transceiver
 Squelch Off key
1
Press the Squelch Off
The " " icon appears. The Busy LED lights green if Busy LED is
enabled.
The transceiver disables the RAN code and Optional Signaling
and unmutes the speaker upon detection of an NXDN frame.
White noise is audible if no carrier is received.
2
Press the Squelch Off
The " " icon disappears. A channel where RAN Decode or
Optional Signaling is configured resumes Signaling Squelch.
FUNC (K)/Ver 4.00
3.4 Using Menu Mode on page
key while Squelch Off is disabled.
key while Squelch Off is enabled.
23.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 112