12.9 Sending Gps Data; Transmission Method Of Gps Data; The Id Of The Target Transceiver - Kenwood NEXEDGE NX-200 Function Reference

12 FleetSync

12.9 Sending GPS Data

12.9 Sending GPS Data
Global Positioning System (GPS) is the system to acquire the current location information of the own transceiver by
receiving signals from the Global Positioning System satellites orbiting the earth.
The transceiver of the mobile station can send the acquired own location information (GPS data) to the base station. The
base station can send received GPS data to the PC as serial commands.
A GPS receiver unit compatible with the NMEA-0183 standard is required and it must be connected to the communication
port of the mobile station transceiver to send GPS data.

Transmission Method of GPS Data

Following are the methods to send GPS data.
 Automatic GPS data transmission
 Sending GPS Data Automatically at Certain Intervals (GPS Report Mode) on page 345
 Sending GPS Data According to the Request from the Base Station (GPS Report Mode) on page 345
 Manual GPS data transmission

Sending GPS Data Manually by Using a Key (Send the GPS Data) on page 346
 GPS data transmission together with operation of the PTT switch

Sending GPS Data Together With Operation of the PTT Switch (GPS Combination) on page 346
 GPS data transmission together with Status Message
 Sending GPS Data Together With Status Call (GPS Combination) on page 347
 GPS data transmission together with Emergency Call
 Sending GPS Data Together With Emergency Call (GPS Combination) on page 347
Note
For a transceiver sending the GPS data, "GPS" must be assigned to the communication port connected to the GPS receiver unit.
(Refer to Available Functions for COM Port on page
The ID of the Target Transceiver (Base Fleet/ Base ID)
Base Fleet and Base ID are the target FleetSync ID to send GPS data.
The FleetSync ID of the base station which is responsible for operation and administration of system is normally
configured for Base ID.
Configuration using KPG-111D/ DN
Configuring the Base Fleet and Base ID (
FUNC (K)/Ver 4.00
524.)
FPRG 8.16.8 GPS Tab)
See
CONTENTS INDEX 344