Nx-700/ Nx-700H/ Nx-800/ Nx-800H - Kenwood NEXEDGE NX-200 Function Reference

1 FUNCTIONS AND PANEL LAYOUT
1.4 NX-700/ NX-700H/ NX-800/ NX-800H/ NX-900/ NX-901
1.4 NX-700/ NX-700H/ NX-800/ NX-800H/ NX-900/ NX-901
Figure 1-4 NX-700/ NX-700H/ NX-800/ NX-800H/ NX-900/ NX-901 Front View
1 [ ] (Power) Switch
The transceiver is turned ON when this switch is
pressed and the transceiver is turned OFF when this
switch is pressed again. The [ ] (Power) switch is
described as the Power switch in this manual and the
Field Programming Reference.
[ ]/ [ ] (Left Up/ Left Down) Key
2
The volume level of the speaker sound can be
adjusted. The preassigned function will be activated
or will be changed to the active state. These [ ] (Left
Up) and [ ] (Left Down) keys are described as [ ]
and [ ] in this manual and the Field Programming
Reference.
LCD
3
The channel number and the transceiver's status
appear on this display.
[ ]/ [ ] (Right Up/ Right Down) Key
4
The zone, channel, or GID can be changed. The
preassigned function will be activated or will be
changed to the active state. These [ ] (Right Up)
and [ ] (Right Down) keys are described as [ ] and
[ ] in this manual and the Field Programming
Reference.
Speaker
5
The received audio and Alert Tone sound from the
speaker.
Transmit LED/ Busy LED
8
These LEDs light when the transceiver transmits or
receives a signal.
Microphone Connector
7
A microphone can be connected to this connector.
[ ] (Triangle) Key
8
The preassigned function will be activated or will be
changed to the active state. The [
is described as the Triangle key in this manual and
the Field Programming Reference.
FUNC (K)/Ver 4.00
1 2 3
6
7 8 9 10
] (Triangle) key
4 5
11 12 13
[ ] (Menu) Key
9
The preassigned function will be activated or will be
changed to the active state. The [
described as the Menu ([
the Field Programming Reference.
The default of the [
function. If the configuration is changed using
KPG-111D/ DN, a newly configured function will be
activated. Unless the Menu function is reassigned to
the [ ] (Menu) key, Menu Mode cannot be activated
even if the[ ] (Menu) key is pressed. Refer to
Operations for Each Mode on page 531
how the transceiver behaves when the [
key is pressed in Menu Mode.
[ ] (Back) Key
10
The preassigned function will be activated or will be
changed to the active state. The [
described as the Back key in this manual and the
Field Programming Reference.
[ ] (Left) Key
11
The preassigned function will be activated or will be
changed to the active state. The [
described as the Left key in this manual and the Field
Programming Reference.
[ ] (Right/Home) Key
12
The preassigned function will be activated or will be
changed to the active state. The [
key is described as the Right/Home key in this
manual and the Field Programming Reference.
[ ] (Square) Key
13
The preassigned function will be activated or will be
changed to the active state. The [ ] (Square) key is
described as the Square key in this manual and the
Field Programming Reference.
CONTENTS
] (Menu) key is
]) key in this manual and
] (Menu) key is the Menu
Key
for details on
] (Menu)
] (Back) key is
] (Left) key is
] (Right/Home)
INDEX 6