Kenwood NEXEDGE NX-200 Function Reference page 448

17 COMMUNICATION SECURITY
17.2 Optional Voice Scrambler (Analog)
2
Press the Up or Down
to select a Scrambler Code.
Refer to Selecting or Clearing Data from a List on page 42
selection methods.
3
Press the Side 1 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411) or the
The selected Scrambler Code is configured for the transceiver.
Configuration using KPG-111D/ DN
• Assigning functions to the PF keys on the transceiver (
• Configuring the Scrambler Code (
Scrambler/Encryption Status Memory
Scrambler/Encryption Status Memory is the function to retain in the transceiver the Voice Scrambler status of each
channel, either enabled or disabled, and the Scrambler Code configured for each channel.
If Scrambler/Encryption Status Memory is enabled, the Voice Scrambler status, either enabled or disabled, and the
Scrambler Code retained in the transceiver are read and applied to the parameters for each channel when the data is read
from the transceiver using KPG-111D/ DN.
Configuration using KPG-111D/ DN
Configuring the Scrambler/Encryption Status Memory to be enabled or disabled (
Tab)
Echo PTT
Echo PTT is the function to allow the Voice Scrambler Board to control the transceiver behavior for transmission.
For details on this function, refer to the instruction manual supplied with Voice Scrambler Board.
Configuration using KPG-111D/ DN
Configuring the Echo PTT to be enabled or disabled (
FUNC (K)/Ver 4.00
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or press the
See FPRG 8.3.4 Page 2 Tab and 8.7.20 Scrambler Code)
See
for
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Triangle
FPRG 8.12 Key Assignment Window)
See
See
FPRG 8.29.4 Echo PTT and 8.30.1 Optional Board Tab)
CONTENTS
[ ] or [ ] key (Mobile)
Mobile
key (Mobile).
FPRG 8.10.1 Common Page 1
INDEX 414