Kenwood NEXEDGE NX-200 Function Reference page 160

8 NXDN CONVENTIONAL SYSTEM
8.5 Making an Individual Call
Checking a Received Individual Call, Status Message or Short Message
8.5 Making an Individual Call
Individual Call can be used to initiate a call to a target transceiver individually to establish voice calls.
By specifying a Unit ID, the transceiver can initiate a call to the transceiver having the Unit ID.
Individual Call Acknowledge Request needs to be disabled on both the transmitting transceiver and the receiving
transceiver to initiate an Individual Call in an NXDN Conventional system.
Configuration using KPG-111D/ DN
Configuring the Individual Call Acknowledge Request to be enabled or disabled (
Initiating an Individual Call
An Individual Call can be started by one of the following methods.
 Individual Call Mode
In Individual Call Mode, an Individual Call is initiated by selecting a Unit ID configured in the Unit ID List or directly
entering a Unit ID.
Pressing the Individual (NXDN), Individual + Status (NXDN), or Individual + SDM (NXDN) key places the
transceiver in Individual Call Mode.
Or, the transceiver also enters Individual Call Mode by a user selecting "Individual (NXDN)", "Individual + Status
(NXDN)", or "Individual + SDM (NXDN)" after the transceiver enters Menu Mode by a user pressing the Menu key.
(Refer to 3.4 Using Menu Mode on page
Or, pressing the [0] to [9] keys on the keypad causes the transceiver to enter Individual Call Mode if "Individual
(NXDN)", "Individual + Status (NXDN)" or "Individual + SDM (NXDN)" is configured for Keypad Operation. The
transceiver enters Unit ID Shortcut Entry Mode or will be on hold as the first digit of the Unit ID is entered. (Refer to
Keypad Operation on page
FUNC (K)/Ver 4.00
Normal Mode
*1
,
Side 1
Stack Mode
*2
,
Triangle
Press and hold the Menu ([
or
or press the Left key.
Right/Home key
Unit ID display
Status Message/ Short Message display
Channel Name display
Time Stamp display
*1 NX-200/ NX-210/ NX-300/ NX-410/ NX-411
*2 Mobile
23.)
21.)
Press the Stack key.
]) or [*] key,
FPRG 8.19.5 Conventional Tab)
See
CONTENTS INDEX 126