Kenwood NEXEDGE NX-200 Function Reference page 464

18 DATA COMMUNICATION FUNCTIONS
18.5 Transparent
If the transceiver cannot send data since the channel is busy, the
Busy Tone 2 sounds and "BUSY" appears on the transceiver
main display for 1 sec, and then the transceiver restores the
previous display.
Receiving Transceiver Behavior
The transceiver which receives the Transparent data from the transceiver for which "Transparent" is assigned to its
communication port sends the data received from the communication port to which "Transparent" is assigned.
Also, the transceiver which receives the Transparent data from the transceiver for which "Transparent 2 (NXDN)" is
assigned to its communication port sends the data received from the communication port to which "Transparent 2 (NXDN)"
is assigned.
If Header is enabled using KPG-111D/ DN, the transmitting transceiver's ID information is automatically added to the
beginning of the transmission data. When another transceiver receives the data, the ID information can easily be identified.
(Refer to Transparent Header on page
Transceiver Behavior
1
The transceiver receives data.
"COMPLETE" appears on the transceiver main display for 1 sec
when the reception completes, and then the transceiver restores
the previous display.
FUNC (K)/Ver 4.00
434.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 430