Character Entry - Kenwood NEXEDGE NX-200 Function Reference

3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)

Character Entry

Character Entry is a function to enter alphanumeric characters and symbols by pressing the [0] to [9], Up and Down keys
(NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or [ ] and [ ] keys (Mobile).
Symbols, lower case letters, etc. can be entered by using the [0] to [9], Up and Down keys (NX-200/ NX-210/ NX-300/
NX-410/ NX-411),or [ ] and [ ] keys (Mobile) on the keypad. The number of key operations for entering characters can
be minimized by configuring only necessary characters.
A maximum of 16 alphanumeric characters and symbols can be configured for the [0] to [9] keys on the keypad.
A maximum of 80 alphanumeric characters and symbols can be configured for the Up and Down keys (NX-200/ NX-210/
NX-300/ NX-410/ NX-411), or [ ] and [ ] keys (Mobile).
Character Entry is used to enter a DTMF Name in Autodial Programming Mode or to enter a message in Short Message
Mode, etc.
Note
This function is unavailable for NX-200S/ NX-300S.
Operating the Transceiver (Operation Examples for NX-200/ NX-210/ NX-300/ NX-410/ NX-411)
 If "AaBbCc...Zz" is configured for Up and Down keys
 If "ABCabc2" is configured for the [2] key
Note
Refer to 3.8 Operating the Transceiver in Each Mode (Common Operation) on page 42
Configuration using KPG-111D/ DN
Configuring the Character Entry (
FUNC (K)/Ver 4.00
Each time the Up key is pressed, a focused letter varies
in the predetermined order.
Each time the Down key is pressed, a focused letter varies
in the opposite order to the predetermined order.
Each time the [2] key is pressed, a focused letter varies
in the predetermined order.
FPRG 8.12.9 Character Entry Tab)
See
for operation methods.
CONTENTS INDEX 62