Kenwood NEXEDGE NX-200 Function Reference page 209

8 NXDN CONVENTIONAL SYSTEM
8.14 Site Roaming
• If "Site Roaming with RAN" is configured for Zone Type:
If the received RAN code matches that preconfigured for the channel, the transceiver unmutes the speaker and
the channel will be the Revert Channel.
If the received RAN code does not match the RAN code preconfigured for the channel or if no RAN code is
configured for the channel, the transceiver migrates to the channel having the second strongest RSSI level (for
example, Channel 2) and examines whether the received RAN code matches the RAN code preconfigured for the
channel. If the received RAN code matches the RAN Code preconfigured for the channel, the transceiver
unmutes the speaker and the channel becomes a Revert Channel.
F: While the received RAN code matches the RAN code preconfigured for the channel, the transceiver will remain on the
channel and will not resume Site Roaming.
G: If the received signal disappear or the received RAN code does not match that preconfigured for the channel, Dropout
Delay Time will be activated.
H: After the time configured for the Dropout Delay Time elapses, the transceiver resumes Site Roaming.
Note
• The following functions cannot be used on a channel in the zone configured as Site Roaming or Site Roaming with RAN.
• Scan Add
• Data
• The following functions cannot be used in a zone configured as Site Roaming or Site Roaming with RAN.
• Home CH/GID
• Data Zone-CH/GID (Analog)
• Data Zone-CH/GID (NXDN)
• Zone Add
• Scan List
• Home CH/GID key
• Home CH/GID Select key
• Direct CH/GID 1 to Direct CH/GID 5 key
• Direct CH/GID 1 Select to Direct CH/GID 5 Select key
• Scan key
• The number of a zone configured as Site Roaming or Site Roaming with RAN cannot be configured for the following functions.
• Direct CH/GID 1 to Direct CH/GID 5
• Priority 1 Zone-Channel
• Priority 2 Zone-Channel
• Emergency Zone-CH/GID
• If the zone is configured as other than Site Roaming and Site Roaming with RAN, the number of a zone configured as Site Roaming or
Site Roaming with RAN cannot be configured for the following functions.
• Data Zone-CH/GID (Analog)
• Data Zone-CH/GID (NXDN)
• Scan List Table
• If the transceiver initiates an Emergency Call in the zone configured as Site Roaming or Site Roaming with RAN, the transceiver
transmits on the Revert Channel regardless of the configuration for Emergency CH/GID Type (Selected or Fixed).
• The Revert Channel used for Site Roaming is not retained when the zone is changed.
• If the zone configured as Site Roaming or Site Roaming with RAN is selected while the transceiver is scanning, the transceiver
resumes Site Roaming.
Configuration using KPG-111D/ DN
Configuring the Zone Type (
FUNC (K)/Ver 4.00
See FPRG 8.1 Zone Information Window)
CONTENTS INDEX 175