Kenwood NEXEDGE NX-200 Function Reference page 512

21 VOX (PORTABLE ONLY)
21.4 Disabling the VOX by Using the PTT Switch (Cancel Operation)/ 21.5 Notifying a User of the Start of a VOX Transmission with a
21.4 Disabling the VOX by Using the PTT Switch
(Cancel Operation)
Cancel Operation is the function to deactivate the VOX if the PTT switch is pressed while the VOX is activated.
Even if VOX is deactivated by pressing the PTT switch, VOX is activated if the VOX key is pressed and held or "VOX" is
selected after the transceiver enters Menu Mode by pressing the Menu key. If no key is assigned as the VOX key and
"VOX" is not configured for Menu Mode, turning the transceiver ON again enables VOX to be activated.
Configuration using KPG-111D/ DN
Configuring the Cancel Operation (
21.5 Notifying a User of the Start of a VOX Transmission with a
Tone (VOX Proceed Tone)
VOX Proceed Tone is the tone notifying a user that a transmission using the VOX has been started.
If this function is enabled, a VOX Proceed Tone sounds from the transceiver to notify the start of transmission when the
transmission using the VOX starts.
Note
If other tones, such as a Sidetone or a PTT ID Sidetone, are configured to be emitted, a VOX Proceed Tone does not sound.
Configuration using KPG-111D/ DN
Configuring the VOX Proceed Tone (
FUNC (K)/Ver 4.00
FPRG 8.11.1 Conventional Tab)
See
FPRG 8.11.1 Conventional Tab)
See
CONTENTS INDEX 478