Changing The Channel Or Gid By Specifying The Number (Channel Entry) - Kenwood NEXEDGE NX-200 Function Reference

3 BASIC OPERATIONS
3.5 Changing the Zone-channel or GID

Changing the Channel or GID by Specifying the Number (Channel Entry)

Channel Entry can be used to directly migrate to the channel or GID a user wishes to use.
For use of this function, pressing the Channel Entry or Group ID/Channel Entry keys causes the transceiver to enter
Channel Entry Mode.
 Using the Channel Entry key
The channel or GID number in the current zone can be specified by directly entering numbers after pressing the
Channel Entry key.
Also, if "Channel Entry" is configured for the Keypad Operation, the channel or GID number can be specified by
pressing the [0] to [9] keys on the keypad even if the Channel Entry key is not pressed.
 Using the Group ID/Channel Entry key
While a zone other than an NXDN Trunking system zone is selected, the channel or GID in the current zone can be
specified by directly entering numbers after pressing the Group ID/Channel Entry key.
Also, if the "Group ID/Channel Entry" is configured for the Keypad Operation, the channel or GID can be specified by
pressing the [0] to [9] keys on the keypad while a zone other than an NXDN Trunking system zone is selected.
The transceiver automatically recognizes the digits of the highest channel or GID number configured for the
transceiver. The channel or GID number can be entered within this range of digits.
Operating the Transceiver
1
Press the Channel Entry
an NXDN Trunking system zone.
The transceiver enters Channel Entry Mode.
The following operations are identical even if the transceiver
enters Channel Entry Mode by a user pressing the keypad.
2
Enter the channel number.
The following are examples for entering a channel number.
• If the maximum channel number has 3 digits:
To make a call on channel 250, press the [2], [5] and [0] keys in this order.
To make a call on channel 90, press the [0], [9] and [0] keys in this order.
To make a call on channel 7, press the [0], [0] and [7] keys in this order.
• If the maximum channel number has 2 digits:
To make a call on channel 90, press the [9] and [0] keys in this order.
To make a call on channel 7, press the [0] and [7] keys in this order.
• If the maximum channel number has 1 digit:
To make a call on channel 7, press the [7] key.
3
Press the Menu ([
The transceiver will migrate to the channel or GID of the number entered, after ending Channel Entry Mode.
FUNC (K)/Ver 4.00
key, or press the Group ID/Channel Entry
]) key.
key after selecting a zone other than
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 29