Kenwood NEXEDGE NX-200 Function Reference page 166

8 NXDN CONVENTIONAL SYSTEM
8.5 Making an Individual Call
Configuration
Individual The type of tone sounding from the transceiver can be configured for a Individual Call from the Unit IDs
(Alert Tone) registered in the Unit ID List.
The type of tone sounding from the transceiver can be configured for a Paging Call, an Individual Call (Message
Trunked (Enhanced)) and an Individual Call (Individual Call Acknowledge Request) from the Unit IDs registered
in the Unit ID List.
However, if receiving an Individual Call (Message Trunked (Enhanced)) or an Individual Call (Individual Call
Paging (Alert Tone)
Acknowledge Request) with the Automatic Response disabled, the configuration for Paging will apply.
Note
Individual Call (Message Trunked (Enhanced)) can be used only in an NXDN Trunking system.
Note
If the transceiver is operated in multiple systems of an NXDN Trunking system, the Unit ID List configured in the Home System is used.
(Refer to 9 NXDN TRUNKING SYSTEM on page
Configuration using KPG-111D/ DN
Configuring the Unit ID List (
Displaying the ID of the Communicating Caller on the LCD (Caller ID Display)
Caller ID Display can be used to display the caller's Unit ID Name or Unit ID on the main display when the transceiver
receives a call in an NXDN Conventional system.
In addition to the above function, the received Unit ID or Group ID can be displayed on the main display upon the receipt of
the signals transmitted by the transceiver using Group Call.
A user can identify the caller not only by voice, but also through the display.
Depending on the configuration of Caller ID Display (Off, RAN, or RAN and Selcall), the operation of the transceiver
receiving a call in an NXDN Conventional system is as follows.
 Off
When the transceiver receives an NXDN digital signal in an NXDN Conventional system, the received ID does not
appear on the main display.
 RAN
When the transceiver receives a signal transmitted only using the RAN code, the received Unit ID Name or Unit ID
appears on the main display if the received RAN code matches the RAN code preconfigured in the transceiver,
regardless of the Optional Signaling (NXDN) configuration.
If the transceiver receives a Group Call, Caller ID Display will not be activated.
 RAN and Selcall
When the transceiver receives a signal transmitted only using the RAN code, the received Unit ID Name or Unit ID
appears on the main display if the received RAN code matches the preconfigured RAN code in the transceiver,
regardless of the Optional Signaling (NXDN) configuration.
If the transceiver stands by on the channel where "None" or "DTMF" is configured for Optional Signaling (NXDN) when
the transceiver receives a Group Call, and if the received RAN code matches the RAN code preconfigured in the
transceiver, the received Unit ID Name or Unit ID, and Group ID appear on the main display according to the Group
Call Display Type configuration.
If the transceiver receives a Group ID which is not registered in the Group ID List, Group ID No. will appear. If the
Group ID is not registered in the Group ID List upon the receipt of a Group ID for which "ALL" is configured, Caller ID
Display will not be activated. Also, if the transceiver stands by on the channel where "NXDN ID" is configured for
Optional Signaling (NXDN), Caller ID Display will not be activated.
FUNC (K)/Ver 4.00
187.)
See FPRG 8.19.6 Unit ID List Tab)
Description
CONTENTS INDEX 132