Kenwood NEXEDGE NX-200 Function Reference page 206

8 NXDN CONVENTIONAL SYSTEM
8.13 Communicating using a CW Message
CW Speed
CW Speed refers to how fast the CW Message is sent by using Morse code.
Configuration using KPG-111D/ DN
Configuring the CW Speed (
CW Modulation Delay Time
CW Modulation Delay Time is the amount of time from when the transceiver starts transmitting until the transceiver starts
sending the CW Message.
Note
If "Off" is configured for CW Modulation Delay Time, the transceiver sends a CW Message immediately after the transceiver starts
transmitting.
Configuration using KPG-111D/ DN
Configuring the CW Modulation Delay Time (
Audio Frequency
Audio Frequency is the frequency used to send the CW Message.
Configuration using KPG-111D/ DN
Configuring the Audio Frequency (
CW Sidetone
CW Sidetone is the function to emit tones from the speaker while the transceiver sends a CW Message.
Configuration using KPG-111D/ DN
Configuring the CW Sidetone to be enabled or disabled (
FUNC (K)/Ver 4.00
FPRG 8.10.4 CW ID Dialog Box)
See
PF Key
CW Modulation Delay Time
CW Message
Figure 8-6 CW Modulation Delay Time
FPRG 8.10.4 CW ID Dialog Box)
See
FPRG 8.10.4 CW ID Dialog Box)
See
Push Push
Start Stop Start
Transmit
FPRG 8.10.4 CW ID Dialog Box)
See
Stop
Transmit
CONTENTS INDEX 172