Kenwood NEXEDGE NX-200 Function Reference page 483

19 SCAN
19.7 Transceiver Behavior during the Scan
LTR ID - Optional Signaling AND Transceiver Behavior
The transceiver pauses scanning if the decoded LTR ID matches the LTR ID to be scanned. The transceiver does not emit
the received audio and then waits to receive an Optional Signaling.
The transceiver resumes scanning after the amount of time configured for Dropout Delay Time elapses if the decoded LTR
ID matching state is reset while waiting to receive the Optional Signaling.
The transceiver emits the received audio and Alert Tone or starts transponding when the received Optional Signaling
matches the Optional Signaling preconfigured for the transceiver while waiting to receive the Optional Signaling. The
transceiver stands by for the LTR ID after the Optional Signaling matches.
Note
The transceiver will migrate to the LTR ID having the higher priority level when the transceiver receives an LTR ID having a higher
priority level than the current LTR ID in an LTR Trunking system.
Configuration using KPG-111D/ DN
Configuring the Audio Control (
Reception during the Scan in an NXDN Trunking System
While the transceiver scans in an NXDN Trunking system, the transceiver will receive as follows:
• The transceiver pauses scanning when the decoded Group ID matches the Group ID to be scanned.
• The transceiver pauses scanning when the decoded Unit ID matches the Unit ID preconfigured for the
transceiver.
• After the transceiver migrates from a traffic channel to a control channel, the transceiver resumes scanning when
the amount of time configured for Dropout Delay Time elapses after Dropout Delay Time is activated.
Note
A Group ID for which "ALL" is configured or a Group ID which is configured for Priority Monitor ID is always scanned regardless of the
configuration for Delete or Add. If a scan pauses on a Group ID for which "ALL" is configured or a Group ID which is configured for
Priority Monitor ID, pressing the Scan Delete/Add key has no effect but the Key-entry Error Tone sounds from the transceiver, and the
Group ID cannot be excluded from the target Group IDs for scanning.
FUNC (K)/Ver 4.00
See FPRG 8.6.9 Audio Control)
CONTENTS INDEX 449