Kenwood NEXEDGE NX-200 Function Reference page 164

8 NXDN CONVENTIONAL SYSTEM
8.5 Making an Individual Call
Receiving an Individual Call
The transceiver can receive an Individual Call if the received Unit ID matches the Unit ID preconfigured in the transceiver.
Note
To receive an Individual Call in an NXDN Conventional system, "NXDN ID" needs to be configured as the Optional Signaling to be
used on the channel. (Refer to
Transceiver Behavior
1
The transceiver receives an Individual Call.
The Alert Tone (Individual Call) sounds from the transceiver and
then the ID Name of the transmitting transceiver will appear.
If the ID Name is not configured in the Unit ID List, the Unit ID List
number appears on the main display.
If the Unit ID is not configured in the Unit ID List, the Unit ID
appears on the main display.
FUNC (K)/Ver 4.00
Using the Optional Signaling (NXDN) on page 119.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 130