Kenwood NEXEDGE NX-200 Function Reference page 475

19 SCAN
19.4 Scanning Desired Multiple Zones (List Scan)
Operating the Transceiver
1
Press the Scan key.
The transceiver starts scanning.
"SCAN n" appears on the main display and the "
appears. The zone number configured for the Scan List can be
entered for "n".
For NX-200S/ NX-300S, the LED blinks green.
Note
If a channel or GID is fixed and the transceiver cannot resume
scanning, such as when the transceiver is migrating to the
Home Channel or GID, etc., the "
Stop Tone continues to sound from the transceiver.
2
Press the Scan key during the scan.
The " " icon disappears and the scan ends.
For NX-200S/ NX-300S, the LED is turned Off and the scan ends.
Configuration using KPG-111D/ DN
• Configuring the Scan List Table (Conventional Group) (
• Configuring the Scan List Table (LTR Trunking System) (
• Configuring the Scan List Table (NXDN Trunking System) (
• Configuring the Scan Add to be enabled or disabled for each channel (
• Configuring the Scan Add to be enabled or disabled for each GID (LTR Trunking System) (
Add)
• Configuring the Scan Add to be enabled or disabled for each GID (NXDN Trunking System) (
Add)
• Configuring the Scan Type of the Conventional Group and LTR Trunking system (
• Configuring the Scan Type of the NXDN Trunking system (
• Assigning functions to the PF keys on the transceiver (
FUNC (K)/Ver 4.00
" icon
" icon blinks and a Scan
See FPRG 8.2.16 Scan List Table Window)
See FPRG 8.6.23 Scan List Table Window)
See
See
FPRG 8.12 Key Assignment Window)
See
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
FPRG 8.8.15 Scan List Table Window)
See FPRG 8.3.3 Page 1 Tab)
See
FPRG 8.13.1 Scan Tab)
See
FPRG 8.13.1 Scan Tab)
CONTENTS
FPRG 8.7.11 Scan
See FPRG 8.9.6 Scan
INDEX 441