Kenwood NEXEDGE NX-200 Function Reference page 77

3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)
 Selecting data from a list by using the keypad (Shortcut Entry)
Following are the operation examples for selecting "ID 0002", "ID 0024" or "ID 0245" from a Unit ID List in Selcall Mode.
Selecting "ID 0002":
Press the [0] and [2] keys on the keypad in this order, and then press the Menu [
Selecting "ID 0024":
Press the [0], [2] and [4] keys on the keypad in this order, and then press the Menu [
Selecting "ID 0245":
Press the [0], [2], [4], and [5] keys on the keypad in this order.
Note
• Following are the main keys to be used for this operation examples.
To determine: the Menu ([ ]) or [*] key
To delete one character: the Back or [#] key
• The number of digits entered varies as follows depending on the highest list number configured in the transceiver:
• If the highest list number is lower than 10: one digit
• If the highest list number is 10 or higher and lower than 100: two digits
• If the highest list number is 100 or higher and lower than 1000: three digits
• If the highest list number is 1000 or higher: four digits
• If the entered number does not exist when it is determined, the transceiver restores the previous display prior to entering the number.
FUNC (K)/Ver 4.00
[0] key
Menu ([ ]) or
[*] key (OK)
[2] key
Menu ([ ]) or
[*] key (OK)
[4] key
Menu ([ ]) or
[*] key (OK)
]) or [*] key (OK) to fix.
]) or [*] key (OK) to fix.
Back or [#] key (Delete)
Back or [#] key (Delete)
Back or [#] key (Delete)
[5] key
CONTENTS INDEX 43