Kenwood NEXEDGE NX-200 Function Reference page 220

8 NXDN CONVENTIONAL SYSTEM
8.18 Actions for Other Transceivers
Checking Whether Another Transceiver is in Operation (Radio Check)
Radio Check can be used to check whether an individually specified transceiver is operating in the system using radio
communication.
In order to use this function, "Data" or "Data + GPS Data Output" must be configured for the communication port of the
transceiver. (Refer to Available Functions for COM Port on page
• The transceiver will send the Status Inquiry Message using Individual Call if a PC sends the Radio Check transmission
command (Status Request Transmission command) to the transceiver.
• The transceiver that receives the Status Inquiry Message sends a Status Message. (Refer to
Message on page 151.)
The transceiver sends the status configured for Default Status if no status is selected yet when the transceiver is turned
ON, for instance.
If status is selected in Status Mode, the transceiver sends the selected status.
The transceiver will send the status retained in the transceiver if the transceiver migrates to normal mode after
selecting the status.
The transceiver sends the status configured for Stun Response Status while Stun is enabled (Transmit Inhibit or
Transceiver Inhibit). If no Stun Response Status is configured, the transceiver transmits the Status in the same manner
as when the transceiver is in the normal state.
• If the transceiver which sent the Status Inquiry Message receives the sent status, the transceiver will receive the status
in the same manner as receiving regular status messages. (Refer to
Note
In an NXDN Conventional system, the transceiver can receive a Status Inquiry Message if the received RAN code matches the RAN
code preconfigured for the transceiver.
Configuration using KPG-111D/ DN
• Configuring the Default Status (
• Configuring the Stun Response Status (
FUNC (K)/Ver 4.00
524.)
See FPRG 8.19.9 Status Tab)
See FPRG 8.19.9 Status Tab)
Sending a Status
Receiving a Status Message on page
CONTENTS
154.)
INDEX 186