Kenwood NEXEDGE NX-200 Function Reference page 300

10 ANALOG CONVENTIONAL SYSTEM
10.3 Changing the Decode/ Encode Combination of the QT/DQT (OST)
Selecting the OST List
The OST List (QT/DQT Decode/ Encode pair) to be used can be selected in OST List Mode.
Pressing and holding the Operator Selectable Tone key causes the transceiver to enter OST List Mode.
Or, the transceiver enters OST List Mode when "OST List" is selected after entering Menu Mode by pressing the Menu
key. (Refer to 3.4 Using Menu Mode on page
Operating the Transceiver
1
Press and hold the
The transceiver enters OST List Mode.
The following operations are identical even if the transceiver enters OST List Mode by a user pressing the Menu key or with
keypad entry.
2
Press the Up or Down
to select the OST code from OST List.
Refer to Selecting or Clearing Data from a List on page 42
Note
QT/DQT Encode and QT/DQT Decode can be disabled if "TONE OFF" is selected. (Refer to
Encode (Tone Off) on page
3
Press the Side 1 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411) or the
The selected OST code is configured for the transceiver.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Using the Keypad to Select the OST Code (Direct OST)
Direct OST is the function that is used to select an OST code by using the keypad.
If "OST" is configured for Keypad Operation, an OST code can be selected using the keypad. (Refer to
on page 21.)
FUNC (K)/Ver 4.00
23.)
Operator Selectable Tone
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or press the
268.)
key.
for selection methods.
Triangle
FPRG 8.12 Key Assignment Window)
See
[ ] or [ ] key (Mobile)
Disabling the QT/DQT Decode/
key (Mobile).
Keypad Operation
CONTENTS INDEX 266