Kenwood NEXEDGE NX-200 Function Reference page 510

21 VOX (PORTABLE ONLY)
21.1 Configuring the Input Sensitivity of the Microphone (VOX Gain Level)
21.1 Configuring the Input Sensitivity of the Microphone
(VOX Gain Level)
VOX Gain Level is the input sensitivity of the microphone.
VOX Gain Level can be configured using KPG-111D/ DN. VOX Gain Level can also be adjusted by user operation.
Pressing the VOX key causes the transceiver to enter VOX Gain Level Mode.
The transceiver also enters VOX Gain Level Mode if "VOX Gain Level" is selected after entering Menu Mode by pressing
the Menu key. (Refer to 3.4 Using Menu Mode on page
Operating the Transceiver
1
Press the VOX key.
The transceiver enters VOX Gain Level Mode and then the
current VOX Gain Level appears.
The following operations are identical even if the transceiver
enters VOX Gain Level Mode by a user pressing the Menu key.
2
Adjust the VOX Gain Level by pressing the
VOX Gain Level can be adjusted in the range between 1 and 10.
Larger value results in higher sensitivity.
3
Speak into the microphone of the headset to check whether the sensitivity is configured properly.
The LED lights orange when the audio input level reaches the
reference value for transmission. In this case, the transceiver
does not transmit.
4
Press the Side 1 key.
VOX Gain Level is configured and then VOX is activated.
Note
The status of VOX Gain Level is retained in the transceiver even after the transceiver is turned OFF.
Configuration using KPG-111D/ DN
• Configuring the VOX Gain Level (
• Assigning functions to the PF keys on the transceiver (
FUNC (K)/Ver 4.00
23.)
Up or Down
FPRG 8.11.1 Conventional Tab)
See
See FPRG 8.12 Key Assignment Window)
key.
CONTENTS INDEX 476