Kenwood NEXEDGE NX-200 Function Reference page 561

APPENDIX
Functions Not Available with NX-200S/ NX-300S
Functions Not Available with NX-200S/ NX-300S
Following functions are unavailable for NX-200S/ NX-300S.
Note
Functions available only for Mobile are not listed in the following list.
Item
Basic Function
Clock
GPS Position Display
Transceiver Password
Keypad Operation
Menu
Key Assignment
Display Function
Display Format
Sub-LCD Display
Power-on Text
Backlight
Signal Strength Indicator
Call Indicator
Battery Indicator
Key Guide
Display Customization
Custom Start-up Screen
LTR
System Search
DTMF
Autodial Programming
Encode
Decode
FUNC (K)/Ver 4.00
Table 1-9 Functions Not Available with NX-200S/ NX-300S
Refer to Table 1-10 Functions Not Available with NX-200S/ NX-300S (Key Function).
For NX-200S/ NX-300S, the Battery Indicator is the function that notifies by a lighting LED
that the remaining battery level is low. Either Off or LED can be configured for Battery
Indicator. If LED is configured for Battery Indicator, the LED notifies a user by lighting or
blinking upon a press of the Battery Indicator key that the remaining battery level is low
as follows.
Lit green: Full
Lit orange: Low
Lit red: Low
Blinking red: Very Low
Autodial Mode, Manual Dial or Keypad Auto PTT are unavailable.
Monitor of the Auto Reset Timer is always retained in the enabled state.
Remarks
CONTENTS INDEX 527