About The Programming Software; Firmware Version Of The Transceiver And Version Of Kpg-111D/ Kpg-111Dn - Kenwood NEXEDGE NX-200 Function Reference

About the Programming Software/ Firmware Version of the Transceiver and Version of KPG-111D/ KPG-111DN

About the Programming Software

Various functions and parameters of the transceiver can be configured by using the KPG-111D/ KPG-111DN software.
Various functions can be enabled by connecting the transceiver to a PC by use of KPG-36/ KPG-36A/ KPG-36U (Portable)
or KPG-46/ KPG-46A/ KPG-46U (Mobile) programing cables and writing the data configured using KPG-111D/
KPG-111DN to the transceiver. In this manual, the description of each function in the Function Reference may have a
corresponding reference in the Field Programming Reference. Therefore, you can configure the function by referring to the
function also appearing in the Field Programming Reference.
About KPG-111DN
KPG-111DN is the programming software to configure functions for the transceiver to be used in the U.S.A. KPG-111DN is
compliant with the FCC Part 90 standard so that the specification does not allow to configure "Wide" (25 kHz) for Channel
Spacing with a VHF or UHF (except 300 MHz) transceiver in the frequency band regulated by the FCC Part 90. For
functions other than the above function, specifications of KPG-111DN are the same as those of KPG-111D.
Firmware Version of the Transceiver and Version of
KPG-111D/ KPG-111DN
Following are versions of KPG-111D/ KPG-111DN that support firmware version of the transceiver.
Firmware Version of the Transceiver
4.00.00 or later
FUNC (K)/Ver 4.00
KPG-111D version number
V4.00 or later
KPG-111DN version number
V4.00 or later
CONTENTS INDEX vi