Kenwood NEXEDGE NX-200 Function Reference page 585

APPENDIX
Key Operations for Each Mode
Selecting a list (Conventional)
Key
Selects a Group ID registered in
Press the Group ID List by changing the
ID one at a time.
[ ]/ [ ]
Selects a Group ID registered in
Hold the Group ID List by changing from
Down one ID to another continuously.
Triangle Press
Square Press
Aborts the current mode or
Press migrates to the Status Mode.
Menu ([ ])
Hold
Down
Restores the previous display (if the transceiver enters this mode by a
Press
Back
Hold
Down
Left Press
Right/Home Press
[0] to [9] Press Selects a Group ID from the list.
[A] to [D] Press
Press
[*]
Hold
Down
Restores the previous display (if the transceiver enters this mode by a
Press
[#]
Hold
Down
PTT
(microphone)
Press
switch
FUNC (K)/Ver 4.00
Group/ Group + Status
-
-
user pressing the Menu key).
-
-
-
Aborts the current mode or migrates to the Status Mode.
-
user pressing the Menu key).
-
Individual/ Individual + Status
Selecting a list
Selects a Unit ID registered in the
Unit ID List by changing the ID one
at a time.
Selects a Unit ID from those
registered in the Unit ID List by
changing from one ID to another
continuously.
Aborts the current mode.
Initiates the Paging Call
Aborts the current mode or
migrates to the Status Mode.
Migrates to the code entry mode
(only if Manual Dialing is enabled).
-
Migrates to the code entry mode
(only if Manual Dialing is enabled).
Aborts the current mode.
Selects a Unit ID from the list.
-
Migrates to the code entry mode
(only if Manual Dialing is enabled).
-
Transmits.
Manual entry
Selects a Digit No. by changing
the Digit No. one at a time.
Selects a Digit No. by changing
from one number to another
continuously.
Aborts the current mode after
determining the Digit No. or
migrates to the Status Mode.
Migrates to the list selection mode.
Restores the previous display (if
the transceiver enters this mode
by a user pressing the Menu key)
or deletes one character while
entering the Digit No.
Deletes all characters while
entering the Digit No.
Migrates to the list selection mode.
Enters the Digit No.
-
Aborts the current mode after
determining the Digit No. or
migrates to the Status Mode.
Migrates to the list selection mode.
Restores the previous display (if
the transceiver enters this mode
by a user pressing the Menu key)
or deletes one character while
entering the Digit No.
Deletes all characters while
entering the Digit No.
CONTENTS INDEX 551