Kenwood NEXEDGE NX-200 Function Reference page 554

APPENDIX
Available Functions for the PF Keys
• If the transceiver migrates to each Function Mode, the assigned functions will not be activated by pressing the following keys, but the
mode's own behavior will be executed.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411:
• Up key
• Down key
• Side 1 key
• Side 2 key
• Menu ([ ]) key
• Back key
• Left key
• Right/Home key
• Keypad
• PTT switch
Mobile:
• [ ] key
• [ ] key
• Triangle key
• Square key
• Menu ([ ]) key
• Back key
• Left key
• Right/Home key
• Mic Keypad
• PTT switch
• To directly enter a Fleet/ ID or status in an Analog Conventional system, Manual Dialing must be enabled using KPG-111D/ DN. (Refer
to Manual Dialing on page 23.)
• To directly enter a Unit ID or status in an NXDN Conventional system or NXDN Trunking system, Manual Dialing must be enabled
using KPG-111D/ DN. (Refer to
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
FUNC (K)/Ver 4.00
Manual Dialing on page 23.)
FPRG 8.12 Key Assignment Window)
See
CONTENTS INDEX 520