Kenwood NEXEDGE NX-200 Function Reference page 549

APPENDIX
Available Functions for the PF Keys
Function Name
Monitor Momentary
Operator Selectable Tone
OST List
Playback
Priority-channel Select
Public Address (Mobile only)
Scan
Scan Delete/Add
Scrambler/Encryption
Scrambler/Encryption Code
FUNC (K)/Ver 4.00
In an Analog Conventional system,the transceiver resets the matching
state of QT tone or DQT code and Optional Signaling and resets muting
upon detection of a carrier while the Monitor Momentary key is pressed
and held.
In an NXDN Conventional system,the transceiver resets the matching
state of RAN code and Optional Signaling and deactivates muting upon
detection of an NXDN frame while the Monitor Momentary key is
pressed and held.
Toggles the OST between enabled and disabled. (Refer to
the Decode/ Encode Combination of the QT/DQT (OST) on page
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Enters OST List Mode. In OST List Mode, an OST List can be selected.
(Refer to 10.3 Changing the Decode/ Encode Combination of the QT/
DQT (OST) on page 265.)
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Enters Playback Mode. In Playback Mode, the transceiver can play back
audio recorded in the VGS-1. (Refer to
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Enters Priority-channel Select Mode. In Priority-channel Select Mode, the
channel selected on the transceiver can be changed as a Priority-
channel.
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Toggles the Public Address between enabled and disabled. (Refer to
Using the Transceiver as a Megaphone (Public Address) (Mobile Only)
on page 96.)
Starts or stops scanning. (Refer to
Determines whether the selected channel or GID will be added to a Scan
List. (Refer to 19 SCAN on page
Toggles the Voice Scrambler/ Encryption between enabled and disabled.
(Refer to 17 COMMUNICATION SECURITY on page
Pressing and holding the Scrambler/Encryption key causes the
transceiver to enter Scrambler/Encryption Code Mode. In Scrambler/
Encryption Code Mode, the Scrambler Code and Encryption Key data
can be changed. (Refer to 17 COMMUNICATION SECURITY on page
411.)
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Description
10.3 Changing
20.2 VGS-1 on page
19 SCAN on page 436.)
436.)
411.)
Available System
Analog Conventional System
NXDN Conventional System
LTR Trunking System
265.)
Analog Conventional System
Analog Conventional System
460.)
ALL
Analog Conventional System
NXDN Conventional System
6.5
ALL
ALL
ALL
Voice Scrambler:
Analog Conventional System
LTR Trunking System
Encryption:
NXDN Conventional System
NXDN Trunking System
Voice Scrambler:
Analog Conventional System
LTR Trunking System
Encryption:
NXDN Conventional System
NXDN Trunking System
CONTENTS INDEX
*1
515