Tones That Sound When The Transceiver Receives A Call - Kenwood NEXEDGE NX-200 Function Reference

6 SOUND

6.2 Tones that Sound When the Transceiver Receives a Call

6.2 Tones that Sound When the Transceiver Receives a Call
An Alert Tone sounds from the transceiver such as when the transceiver receives a call using an Individual Call or a Group
Call, a Status Message, or a Short Message and notifies the user of the reception.
The Alert Tone pattern can be configured by selecting from 8 types of tones configured for Special Alert Tone. (Refer to
Configuring the Alert Tone (Alert Tone Pattern) on page
Following are the types of Alert Tone.
DTMF
Alert Tone
2-tone
Alert Tone
FleetSync
Alert Tone (Individual Call)
Alert Tone (Other Selective Calls)
Alert Tone (Paging Call)
NXDN Conventional
Alert Tone (Individual Call)
Alert Tone (Group Call)
Alert Tone (Paging Call)
NXDN Trunking
Alert Tone (Individual Call)
Alert Tone (Conference Group Call)
Alert Tone (Broadcast Group Call)
Alert Tone (Paging Call)
Alert Tone (Telephone Call)
NXDN in common/ FleetSync
Alert Tone (Status/Short Message Call)
Alert Tone (Emergency Response)
FUNC (K)/Ver 4.00
91.)
Table 6-9 Alert Tone
This tone sounds from the transceiver when the transceiver receives a call using a DTMF
code.
This tone sounds from the transceiver when the transceiver receives a call using a 2-tone
code.
This tone sounds from the transceiver when the transceiver receives an Individual Call
using FleetSync.
This tone sounds from the transceiver when the transceiver receives a Group Call, Fleet
Call, Supervisor Call, or Broadcast Call using FleetSync.
This tone sounds from the transceiver when the transceiver receives a Paging Call using
FleetSync.
This tone sounds from the transceiver when the transceiver receives an Individual Call in
NXDN Conventional.
This tone sounds from the transceiver when the transceiver receives a Group Call in
NXDN Conventional.
This tone sounds from the transceiver when the transceiver receives a Paging Call in
NXDN Conventional.
This tone sounds from the transceiver when the transceiver receives an Individual Call in
NXDN Trunking.
This tone sounds from the transceiver when the transceiver receives a Conference Group
Call in NXDN Trunking.
This tone sounds from the transceiver when the transceiver receives a Broadcast Group
Call in NXDN Trunking.
This tone sounds from the transceiver when the transceiver receives a Paging Call in
NXDN Trunking.
This tone sounds from the transceiver when the transceiver receives a Telephone Call in
NXDN Trunking.
This tone sounds from the transceiver when the transceiver receives a Status Message or
a Short Message.
This tone sounds from the transceiver when the transceiver receives an Emergency Call
if "Alert Tone" is configured for Emergency Status Response. (Refer to
Behavior When the Transceiver Receives an Emergency Status on page
16.7 Transceiver
410.)
CONTENTS INDEX 90