Kenwood NEXEDGE NX-200 Function Reference page 574

APPENDIX
Key Operations for Each Mode
Selecting a list
Key
Selects a Fleet/ ID registered in
Press the ID List by changing the Fleet/
ID one at a time.
Up/ Down
Selects a Fleet/ ID number from
Hold those registered in the ID List by
Down changing from one number to
another continuously.
Side 1 Press
Side 2 Press
Aborts the current mode or
Press migrates to the Status Mode.
Menu ([ ])
Hold Migrates to the code entry mode
Down (only if Manual Dialing is enabled).
Restores the previous display (if
the transceiver enters this mode
Press by a user pressing the Menu key).
Back
Hold
Down
Migrates to the code entry mode
Left Press
(only if Manual Dialing is enabled).
Right/Home Press
[0] to [9] Press Selects a Fleet/ ID from the list.
Aborts the current mode or
Press migrates to the Status Mode.
[*]
Hold Migrates to the code entry mode
Down (only if Manual Dialing is enabled).
Restores the previous display (if
the transceiver enters this mode
Press by a user pressing the Menu key).
[#]
Hold
Down
PTT switch Press
FUNC (K)/Ver 4.00
Selcall/ Selcall + Status
Manual entry
Selects a Digit No. by changing
the Digit No. one at a time.
Selects a Digit No. by changing
from one number to another
continuously.
Aborts the current mode.
Initiates the Paging Call
Aborts the current mode after
determining the Digit No. or
migrates to the Status Mode.
Migrates to the list selection mode.
Restores the previous display (if
the transceiver enters this mode
by a user pressing the Menu key)
or deletes one character while
entering the Digit No.
Deletes all characters while
-
entering the Digit No.
Migrates to the list selection mode.
Aborts the current mode.
Enters the Digit No.
Aborts the current mode after
determining the Digit No. or
migrates to the Status Mode.
Migrates to the list selection mode.
Restores the previous display (if
the transceiver enters this mode
by a user pressing the Menu key)
or deletes one character while
entering the Digit No.
Deletes all characters while
-
entering the Digit No.
Transmits.
Site Select
Selecting a list
Selects a site registered in the
system by changing the site one at
a time.
Selects a site number from those
registered in the system by
changing from one number to
another continuously.
-
Aborts the current mode after
determination.
-
Restores the previous display (if
the transceiver enters this mode
by a user pressing the Menu key).
-
-
Selects a site from the list.
Aborts the current mode after
determination.
-
Restores the previous display (if
the transceiver enters this mode
by a user pressing the Menu key).
-
Transmits after aborting the
current mode.
CONTENTS INDEX 540