Kenwood NEXEDGE NX-200 Function Reference page 540

26 MODE
26.3 Copying the Configuration Data to Another Transceiver (Clone Mode)
2
Press the Menu ([
The transceiver enters Panel Tuning Mode.
Note
• Refer to the service manual for instructions on how to operate the transceiver in Panel Tuning Mode, and on how to adjust transmit and
receive capabilities.
• To end Panel Tuning Mode, the transceiver must be turned OFF.
Configuration using KPG-111D/ DN
Configuring whether to permit the use of Panel Tuning Mode (
26.3 Copying the Configuration Data to Another Transceiver
(Clone Mode)
Clone Mode can be used to copy the data configured for the transceiver to another transceiver.
Note
This function is unavailable for NX-200S/ NX-300S.
Operating the Transceiver
1
Turn the transceiver ON while pressing and holding the
The transceiver enters Clone Mode.
FUNC (K)/Ver 4.00
]) key.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
See FPRG 8.10.2 Common Page 2 Tab)
Left key.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
Mobile
Mobile
INDEX 506