Kenwood NEXEDGE NX-200 Function Reference page 451

17 COMMUNICATION SECURITY
17.3 Encryption (NXDN Digital)
Configuration using KPG-111D/ DN
• Configuring the encryption key data (
• Configuring the Encryption to be enabled or disabled (NXDN Trunking System) (
(Encryption Settings), 8.26.8 Encryption (NXDN Trunking System))
• Configuring the Multi-key List Number (NXDN Trunking System) (
(Encryption Settings) and 8.26.9 Multi-key List Number)
• Configuring the Encryption to be enabled or disabled (NXDN Conventional System) (
• Configuring the Multi-key List Number (NXDN Conventional System) (
Toggling the Encryption between Enabled and Disabled
Pressing the Scrambler/ Encryption key toggles the status of Encryption between enabled and disabled.
The status of Encryption (enabled or disabled) can also be switched by pressing the Menu key to enter Menu Mode, and
then selecting "Scrambler/ Encryption". (Refer to
If Encryption is enabled, the transceiver encrypts and then sends voice data or user data such as a Short Message or a
Long Message. If Encryption is disabled, the transceiver transmits communication data without encryption.
The receiving behavior of the transceiver differs depending on the Encryption status, either to be enabled or disabled, and
the configuration for Encryption Type. Refer to
on page 419 for details.
Note
• If the status of Encryption (to be enabled or disabled) is switched for the channel where "Mixed" is configured for Channel Type, the
status of Encryption (to be enabled or disabled) applies for a channel according to the mode (either Analog or NXDN) configured for
Transmit Mode of the channel.
• In an NXDN Conventional system, the Encryption status (to be enabled or disabled) can be configured for each channel, so the
configured Encryption status applies only for the selected channel or GID.
• In an NXDN Trunking system, whether the Encryption status (to be enabled or disabled) is configured for the transceiver or for each
GID can be selected.
Operating the Transceiver
 Enabling the Encryption
1
Press the Scrambler/ Encryption
The " " icon appears and then Encryption will be enabled.
FUNC (K)/Ver 4.00
See FPRG 8.26 Encryption Window)
3.4 Using Menu Mode on page
Transceiver's Behavior upon Receipt of the Encrypted Communication Data
key while Encryption is disabled.
See FPRG 8.9.11 Encryption
See FPRG 8.9.12 Multi-key List Number
See FPRG 6.3.4 Page 2 Tab)
See FPRG 6.3.4 Page 2 Tab)
23.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 417