Method Of Sending The Dtmf Code; Sending The Dtmf Code While Transmitting (Manual Dialing) - Kenwood NEXEDGE NX-200 Function Reference

14 DTMF

14.1 Method of Sending the DTMF Code

14.1 Method of Sending the DTMF Code
Following are methods available to send the DTMF code:
• Manual Dialing
• Keypad Auto PTT
• Store & Send
• Autodial List selection
• Call key
• Redial
• Beginning of Transmit (BOT)
• End of Transmit (EOT)

Sending the DTMF Code While Transmitting (Manual Dialing)

The DTMF code corresponding to a particular key on the keypad can be sent when pressing the key while transmitting by
pressing the PTT switch.
Note
This function is unavailable for NX-200S/ NX-300S.
Operating the Transceiver
1
Press the PTT switch.
2
Press the key corresponding to the DTMF code to be
sent.
The transceiver sends the DTMF code.
3
Repeat Step 2 as necessary.
Configuration using KPG-111D/ DN
Configuring the Manual Dialing to be enabled or disabled (
FUNC (K)/Ver 4.00
FPRG 8.14.1 Encode Tab)
See
CONTENTS INDEX 360