Kenwood NEXEDGE NX-200 Function Reference page 501

20 OPTIONAL BOARD
20.2 VGS-1
Note
• The transceiver exits Playback Mode and then enters receiving mode if the transceiver receives a transmission while playing data.
• The transceiver exits Playback Mode and then transmits if a user attempts to transmit while playing data.
• Message Playback is not activated if GPS Data Storage is active.
• This function is unavailable for NX-200S/ NX-300S.
Operating the Transceiver
 Playing back the audio signal data
1
Press the Playback
The transceiver enters Playback Mode, and then the transceiver starts playing the recorded data.
The subsequent operations are identical even if the transceiver enters Playback Mode by a user pressing the Menu key.
The following displays appear while the transceiver is playing
back the recorded data.
• If the SRAM audio data recorded using Auto Recording is
played back:
"STORE?" appears on the main display.
• If the audio data recorded using Auto Recording is played
back:
The recording type (AR), time and date appear on the main
display.
• If the audio data recorded using Voice Memo is played
back:
The recording type (VM), time and date appear on the main
display.
FUNC (K)/Ver 4.00
key.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 467