Storing The Selected Or Sent Status - Kenwood NEXEDGE NX-200 Function Reference

8 NXDN CONVENTIONAL SYSTEM
8.9 Sending and Receiving a Status Message (Status Call)
Storing the Selected or Sent Status (Status Hold)
Status Hold is the function to store in the transceiver the status selected from the Status List in Status Mode and the status
transmitted.
When the transceiver receives a status request message, the status stored in the transceiver will automatically be
transmitted. Also, the status stored in the transceiver will automatically be stored in GPS data and transmitted.
Configuration
Selected The transceiver stores the status selected from the Status List in Status Mode.
The transceiver stores a status selected from the Status List in Status Mode and a status transmitted by one
of the following method.
• The status transmitted when one of the AUX Input Status Message 1 to AUX Input Status Message 3 ports
Selected + Transmit change (Mobile only)
• The status transmitted when the transceiver is turned ON (Power-on Status)
• The status transmitted by pressing one of the Call 1 to Call 6 keys
• The status transmitted by using a PC command
Note
No function in NX-200S/ NX-300S selects a status from the Status List.
Configuration using KPG-111D/ DN
Configuring the Status Hold (
FUNC (K)/Ver 4.00
Table 8-16 Status Hold
See FPRG 8.10.6 Common Page 4 Tab)
Description
CONTENTS INDEX 162